
HF | NFC: 13.56 MHz | ||
RS485 Interface | ||
![]() |
Integrated Antenna | |
![]() |
Including SDK | |
LED Status Indication | ||
Supports MIFARE Classic® |
MECHANICAL SPECIFICATIONS | ||||
Housing Material: | ABS (Acrylonitrile butadiene styrene) | |||
Dimensions: | 100 × 46 × 20 mm | |||
Weight: | 48 g | |||
Housing Colour: | Black | |||
ELECTRICAL SPECIFICATIONS | ||||
Power Supply: | 5 V (pigtail cable) or 12 V | |||
Current Consumption: |
< 90 mA
|
|||
Operating Frequencies: | 13.56 MHz | |||
Reading range: | up to 5 cm (depending on tag and antenna orientation) | |||
Antenna: | integrated | |||
Connector: |
10 cm pigtail cable (power & data)
|
|||
Signals: | Status LED | |||
Interface: |
RS485
|
|||
ENVIRONMENTAL CONDITIONS | ||||
Operating Temperature: Storage Temperature: |
-20 °C … +70 °C -20 °C … +80 °C |
|||
Humidity: | 5 % up to 95 %, non condensing | |||
SUPPORTED STANDARDS | TAGSÂ Â | ||||
ISO 14443A: |
Read/write: MIFARE® Classic / Mini / 1K / 4K
|
HF | NFC Access Reader NEO is a slim and compact RFID reader with integrated antenna.
The RFID reader is equipped with an RS485 MODBUS interface.
The 13.56 MHz HF version supports the ISO 14443 A standard and reads and writes MIFARE® Classic Mini, 1K and 4K transponders.
The Access Reader NEO enables reading ranges of up to 5 centimetres, depending on tag type and orientation.
Its compact and slim design with LED status display distinguishes the RFID reader from other readers.
The HF | NFC Access Reader NEO is a versatile RFID reader and writer for various applications and locations.
The Access Reader NEO from iDTRONIC comes with a useful SDK for developing controller, Linux or Windows-based applications. In addition to the documentation and command protocols, the SDK contains a Windows-based demo application with full functionality across all supported HF RFID standards.
â–ş Application Areas
Access Control | ||
Vehicle Identification |