Cylindrical Reader M30 UHF
Unique RFID Industrial Reader with M30 Housing
– ISO 18000-63
– UHF: 865 – 868 MHz (ETSI) | 902 – 928 MHz (FCC)
– Integrated Antenna
– Up to +24 dBm / 250 mW
|UHF: 865 – 868 MHz (ETSI) | 902 – 928 MHz (FCC)|
|Supports ISO 18000-63 (EPC Class 1 Generation 2)|
|Various Interface Options|
|IP65 Protection Class|
|Compact Cylindrical Housing|
|10 to 36 V Power Supply|
|Power Supply:||10…36 Vdc|
|Power Consumption:||+24 dBm / 250 mW|
|Operating Frequency:||865 – 868 MHz (ETSI) | 902 – 928 MHz (FCC on request)|
|RF Output Power:||max. 0.5 W (+27 dBm), software configurable|
|RF Input Sensitivity:||–87…–51 dBm, software configurable|
|Operating Distance:||up to 40 cm|
RS232 (R-IN-UHF-5224U) | RS485 (R-IN-UHF-5225U)
CANbus: SAE J1939 (R-IN-UHF-5226U) | CANopen (R-IN-UHF-5227U)
|Status Display:||1 bicolor LED|
|Connector:||5 pin M12 A-coded male connector|
|Antenna Gain:||-8 dBic|
|Beam Width:||100° | 170°|
|Axial Ratio:||< 1.5 dB|
|Housing Material:||Nickelled brass + PC|
|Overall Dimensions:||M30 × 1.5 × 90.65 mm|
|Operating Temperature:||-20 °C to +55 °C|
|Storage Temperature:||-40 °C to +65 °C|
|Humidity:||up to 95 % non-condensing|
|SUPPORTED STANDARDS | TAGS|
Standard ISO 18000-63 (EPC Class 1 Generation 2)
E.g.: Alien Higgs 2/3/4, Impinj Monza, NXP UCODE, etc.
|EMC:||EN 301489-1:2012-04 (v1.9.21), EN 301489-3:2013-12 (V1.6.1)|
|Radio Regulation:||EN 300330-1:2015-08 (V1.8.1), EN 300330-2:2015-08 (V1.6.1)|
|Safety:||EN 60950-1:2014-08, EN 62369-1:2010-03, EN 50364:2010-11|
|RoHS:||EC Guideline 2011/65/EU|
|Supported OS:||Windows XP, Vista, 7, 8, 10|
|Supported Languages:||C#, C++, serial command protocol|
The compact BLUEBOX M30 RFID UHF reader and writer is a stationary Allround RFID reader for automation processes in industry. Its output power is up to +24 dBm / 250 mW. The power can be regulated from 10 dBm in 1 dBm steps. In combination with the integrated circular antenna with -8 dBi antenna gain, the M30 Cylindrical Reader reaches reading distances up to 40 centimeters in industrial environments.
The Cylindrical Reader M30 is a stationary all-round RFID reader for automation processes in industry and supply chain applications.
The cylindrical design is exclusive and unique on the market and was developed by iDTRONIC.
The device is equipped with RS232, RS485 or CANbus (SAE J1939 or CANopen) as well as a 10 – 36 volt power supply interface. Thanks to the cylindrical M30 housing with standardized M12 connector, it can be quickly and flexibly integrated into many existing applications.
The M30 UHF reader and writer from iDTRONIC Professional uses the popular BLUEBOX Software Development Kit with demo and setup tools. The Windows-based tools support all operating systems from XP to Windows 10. Together with the C ++, C # and ASCII command protocol, the SDK provides an easy way to integrate this UHF device.
► Demo Software Introduction
► Application Areas
Send your inquiry to: firstname.lastname@example.org
Or get in touch with us via our contact form: