OEM-RFID-Reader-for-Quality-Control

RFID Reader for Quality Control

Compact RFID Reader with M12 and RJ45 Connector

– RFID HF | NFC

– ISO 14443A/B, ISO 15693, ISO 18000-3M3/EPC HF Gen2

– HID iClass

– Integrated Antenna or External SMA Antenna

– Ethernet RJ45 Interface

– Supports Windows Systems

HF | NFC: 13.56 MHz
Supports ISO 14443A/B, ISO 15693, ISO 18000-3M3/EPC HF Gen2, HID iClass
Integrated Antenna or External SMA Antenna
Ethernet (RJ45) Interface
Solution for Applications in Near-Field Environments with short Reading Ranges
Including SDK
M12 Power Supply
Integration in Machines for Quality Controls
Supports Windows Systems
ELECTRICAL SPECIFICATIONS 
Power Supply: +24 Vdc or PoE
Power Consumption: < 80 mA operating, < 200 mA during power-up cycle
Operating Frequencies: HF | NFC: 13.56 MHz
Operating Distance: up to 5 cm*
Reader IC: CL 663
RF TX Speed: up to 848 kBd
Antenna: Internal, or external via SMA connector*
Antenna Baudrate: 9600…115200 bit/s, 115.200 bits/s default
Interface: Ethernet
Trigger Input: Opto-coupler, 10 mA, internal series resistor, apply +24 Vdc to trigger
Connectors: M12 socket, 5 pin, A-coded | RJ45 Socket (Ethernet)
Signal Output: High-Side switch, 25 V max, 20 mA
MECHANICAL SPECIFICATIONS
Dimensions:
80 × 82 × 55 mm
Material: ABS
Weight: 230 g
ENVIRONMENTAL CONDITIONS  
Operating Temperature: CR- (Chloropren) seal: -40 °C to +60 °C
Surface Resistance: 4×1014 Ohm, IEC 60093
Humidity: 5 % – 95 % RH (Non-condensing)
MTBF: 200‘000 h
IP Protection Class: IP67
SUPPORTED STANDARDS | TAGS
ISO 14443 A and compatible:
Read/Write:
MIFARE® Classic Mini / 1K /4K, MIFARE Ultralight ®, MIFARE Ultralight® C, MIFARE®

DESFire®EV1, MIFARE® Smart MX, MIFARE® Plus S / X, MIFARE® Pro X, NTAG 21x

Read UID only: Read UID only of all other ISO14443A RFID tags
ISO 14443 B and compatible:
SRI4K, SRIX4K, AT88RF020, 66CL160S, SR176
ISO 15693 and compatible:
EM4135, EM4043, EM4x33, EM4x35, I-Code SLI / SLIX, M24LR16/64, TI Tag-it HF-I, SRF55Vxx
ISO 18000-3M3/ EPC HF Gen2:
I-Code ILT-M
HID iClass:
Read UID
APPLICABLE STANDARDS
EMC: EN 301489-1:2012-04 (v1.9.21), EN 301489-3:2013-12 (V1.6.1)
Radio Regulation: EN 300330-1:2015-08 (V1.8.1), EN 300330-2:2015-08 (V1.6.1)
Safety: EN 60950-1:2014-08, EN 62369-1:2010-03, EN 50364:2010-11
RoHS: EC Guideline 2011/65/EU and amendment 2015/863, EN 50581:2012 (valid till 2024-07-07), EN 63000:2018
REACH: EU Guideline 1907/2006, updated by 2018/2005/EU
SDK INFORMATION
Supported OS:
Windows XP, Vista, 7, 8, 8.1, 10
Supported Languages: Binary ASCII command protocol, VS2005 C++Library
Demo Software: Windows

*Reading Distance depends on Tag, Antenna and Environmental Conditions.

► RFID READER FOR QUALITY CONTROLS

The RFID Reader for Quality Control is a compact RFID Reader and Writer. It is suitable for the integration into existing systems within Quality Controls in Productions, Industry 4.0 Environments or for Data Exchange with NFC.

► QUALITY CONTROL WITHIN PRODUCTIONS

Machines in production require a clear message for the various process steps. The RFID Quality Control Reader from iDTRONIC takes into account the most diverse quality requirements in the context of production. Quality aspects such as material properties require a valid check. Compliance with standards is an essential part of quality control.

OPTIMAL FOR NEAR-FIELD ENVIRONMENTS

RFID Reader for Quality Control is equipped with the RFID Frequency HF/NFC (13.56 MHz). It supports transponders and Tags with Standard ISO 14443A/B, ISO 15693, ISO 18000-3M3/EPC HF Gen2 and HID iClass. The antenna integrated in the module transmits data at a speed of up to 115,200 bits per second. Optionally, the RFID Reader is available with an external SMA Antenna Connector.

► CONNECTIVITY OPTIONS FOR INDUSTRIAL PROCESSES

The industrial Ethernet connection offers the possibility to connect the device to many end devices with RJ45 interface.
Power can be supplied either by the Ethernet RJ45 or the M12 connector.

SUPPORTS ALL CURRENT WINDOWS SYSTEMS

The RFID Reader supports all current Windows systems.
The supplied Software Development Kit is designed for installation into your Windows systems.

►  Product Presentation:

►  Demo Software Introduction:

►  Application Areas

Produktionssteuerung Automation Processes
Quality Controls
NFC NFC & Mobile Applications
Datasheet:
Download
SDK Download Link: Download
Demo Software Introduction:
Download
Warranty Certificate: Download
Send your inquiry direct via email to: info@idtronic-rfid.com

Or contact us via our contact form: