m3 sm10

RFID Mobile Computer with HF | NFC

M3 SM10 HF | NFC

– Android 7.0 Operating System

– Cortex-A9 1.0 GHz Dual Core Processor

– 5.0“ HD TFT LCD Screen


– 1D or 2D Barcode Reader


rfid RFID HF | NFC: 13.56 MHz
iso Supports Standard ISO 14443 and ISO 15693
android Android 7.0 “Nougat”
touch 5.0″ HD Touchscreen
interfaces Wi-Fi | Bluetooth
barcode 1D or 2D Barcode Reader
camera 8 Megapixel (Rear Camera) | 2 Megapixel (Front Camera)
ip IP65 Protection Class
gprs GSM | GPRS | GPS | EDGE Quad band | EVDO | CDMA | HSDPA | HSUPA
Dimensions: 76.4 × 154.8 × 21.6 mm
Weight (incl. battery): 336 g
Display: 5.0“ HD TFT LCD (1.280 × 720)
Camera: Front 2 MP Autofocus | Rear 8 MP Autofocus
Battery: Standard Li-ion 3.8 V 4.100 mAh | Extended Li-ion 3.8 V 6.150 mAh
Processor: Cortex-A9 1 GHz Dual-Core
Operating System: Android 7.0 “Nougat”
Memory: RAM 1 GB | ROM 8 GB // Card Slot Micro SD (up to 32 GB)
Interface: Docking connector; Micro USB
Sensors: G-Sensor, Proximity Sensor, Motion Sensor, Light Sensor
Temperature: Operating: -20 °C to +60 °C | Storage: -30 °C to +60 °C
Humidity: 95 % non-condensing
Drop Test: 1.2 m | 1.5 m (with protective boot)
Protection Class: IP65 (with protective boot)
WWAN: 2G GSM / GPRS / EDGE: Quad band (850 / 900 / 1800 / 1900 MHz)
3G EVDO / CDMA / HSDPA / HSUPA (800 / 2100 MHz)
WLAN: IEEE 802.11 a/b/g/n
Bluetooth: Class II, v4.0 (with EDR)
RFID Reader  
13.56 MHz
ISO 14443A, ISO 15693
1D | 2D Barcode Reader
1D Laser Engine: 2D CMOS Imager:
Symbol SE955 Honeywell N6603

The RFID Mobile Device M3 SM10 HF | NFC handheld from M3 Mobile, is an industrial smartphone with intuitive Android 7.0 “Nougat” operating system and integrated HF & NFC reader. It is the perfect solution for anyone looking for a rugged, RFID-enabled RFID Mobile Device M3 SM10 HF | NFC with enterprise-class operating system and user-centric design. NFC and HF tags according to ISO 14443 and ISO 15693 are supported.

The RFID Mobile Device M3 SM10 HF | NFC is equipped with a bright 5-inch HD full-touch screen with scratch-resistant Gorilla Glass and a powerful 1.2 GHz quad-core processor and 1 GB RAM, the M3 SM10 is ideally equipped for daily use. Its IP65 protection class provides reliable protection against water and dust penetration.

The RFID Mobile Device M3 SM10 HF | NFC surpasses all common scanners and increases your flexibility and productivity sustainably.

An 8 megapixel rear camera and 2 megapixel front camera with autofocus guarantee razor-sharp images even under difficult conditions.
The optional integrated 1D or 2D barcode readers enable fast data acquisition and data processing.

RFID Mobile Device M3 SM10 HF | NFC ensures reliable voice and high-speed data transmission and location determination worldwide via GSM, GPRS and GPS. The wireless connection via WLAN complies with the IEEE 802.11 a/b/g/n standard. An energy-saving Li-ion battery ensures many hours of operation.

►  Application Areas

Lagerwirtschaft Warehousing
Handel Retail Markets
SCM Logistics
2 Slot USB Serial
Charging Cradle
M3Orange+_2Slot Cradle
8 Slot /
8 Slot Ethernet
Charging Cradle
M3Orange+_8Slot Cradle
Spare Battery M3Orange+_Spare Battery
Leather Case with Belt Clip M3Orange+_Leather Case Belt Clip
Leather Case with Hand Strap M3Orange+_Leather Case Hand Strap
USB/Serial Charging
Lock System
M3Orange+_Snap on
Spare Pin M3Orange+_Spare Stylus
Scanning Trigger M3Orange+_Scanning Trigger
Car Charging Cable M3Orange+_Auto Charger Cable
Car Suction Holder M3Orange+_Vehicle mount suction type
Car Screw Holder M3Orange+_Vehicle mount screw type
Case M3Orange+_Fabric Case
pdf Datasheet:
pdf Overview Accessories: Download
sdk SDK Download Link:
warranty Warranty Certificate: Download

Send your inquiry to: info@idtronic-rfid.com

Or get in touch with us via our contact form: